Connect with us

Autos

Czinger ups specs for 21C 3D-printed hypercar, promises 8.1s quarter-mile time

Published

on

Czinger 21C

American startup Czinger shocked the automotive world in early 2020 when it unveiled the 21C, a 3D-printed hybrid hypercar with a central driving position and performance on the same level as cars coming from the likes of SSC and Koenigsegg.

On Tuesday, the Los Angeles-based company unveiled the production-ready 21C and it’s even wilder than before.

Czinger 21C

The 21C’s track has been widened to 80.7 inches for production, with the extra width requiring new designs for the fenders and front and rear fascias. Incredibly, weight has also been reduced, with the dry figure decreasing from 2,755 to 2,733 pounds.

The standard power rating remains unchanged at 1,233 hp, but a new power upgrade is being offered that can boost the output to 1,331 hp. The power is courtesy of a sophisticated powertrain that consists of a bespoke 2.88-liter twin-turbocharged V-8 and trio of electric motors. Two of the motors power the front wheels while the V-8, which features a flat-plane crank design, powers the rear pair via a 7-speed automated manual transmission. The third electric motor is mated to the V-8 and acts as a generator. It ensures the vehicle’s pair of fast-charging lithium-titanate batteries are always topped up.

Czinger 21C

Czinger 21C

Claimed performance specs include a 0-62 mph time of 1.9 seconds, a quarter-mile time of 8.1 seconds, and a top speed of 281 mph (with an available low-drag configuration). Those figures are better than what Rimac has claimed for its Nevera electric hypercar, and that top speed is just shy of the current record for production cars, the 282.9 mph set by the SSC Tuatara in January.

Other claimed performance specs include 0-186 mph acceleration in 8.5 seconds, 0-248-0 mph acceleration in 27.2 seconds, and 1,355 pounds of downforce at just 100 mph.

Czinger 21C

Czinger 21C

Czinger plans to build just 80 examples of the 21C and the first example is expected to be delivered later in 2021. Production will be handled at a facility in L.A., with the process doing away with tooling, assembly lines, and all the other expensive trappings of traditional automotive manufacturing.

Almost all of the metal components—aluminum, titanium, and Inconel (a heat-resistant material originally developed for use in the aerospace industry)—are 3D-printed while composite body parts are formed in molds. And instead of mating components together on a traditional assembly line, everything is done by robots in one central location.

Kevin Czinger

Kevin Czinger

At the 21C’s reveal last year, the company announced a starting price of $1.7 million. It isn’t clear if this figure has changed in the time since. Also at the 21C’s reveal, Czinger CEO and founder Kevin Czinger said the plan was to make the company a proper performance marque with multiple models.

Czinger is known to have at least three more models on the drawing board, with the first of these expected to arrive after 2023. These additional Czingers will be more attainable than the 21C but still exclusive offerings with extreme performance.

Continue Reading
Advertisement
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Autos

Audi to launch last car with internal-combustion engine in 2026

Published

on

Markus Duesmann

Audi CEO Markus Duesmann used Tuesday’s Climate Neutrality Foundation conference in Berlin to confirm the automaker’s plans to transition to a fully electric lineup.

Duesmann said Audi will launch its final car equipped with an internal-combustion engine in 2026. Beyond this date, the automaker will only launch electric vehicles, he said.

Audi expects to finally stop selling vehicles equipped with an internal-combustion engine (including hybrids) by 2033 though may push this date further out depending on market conditions. According to Duesmann, there may still be demand in some markets, particularly China, for vehicles with internal-combustion engines beyond 2033.

Markus Duesmann

By eventually moving to a fully electric lineup, Audi will dramatically reduce its carbon footprint. The automaker aims to achieve net-zero emissions by 2050, at the latest.

Audi is joining a growing consortium of automakers committed to switching to electric lineups within a decade. Fellow Volkswagen Group brand Bentley as early as last November confirmed to make the switch by 2030. The most aggressive among established automakers is Jaguar which in February said it will be an electric-only brand by as early as 2025.

By that 2025 date, Audi aims to have more than 20 electric vehicles in its lineup. Already on sale are the E-Tron, E-Tron Sportback, and E-Tron GT, and arriving soon are the Q4 E-Tron and Q4 Sportback E-Tron.

Audi A6 E-Tron Concept - 2021 Shanghai auto show

Audi A6 E-Tron Concept – 2021 Shanghai auto show

And further down the pipeline is a Q6 E-Tron due in 2022 and an A6 E-Tron due in 2023, as well as a technological flagship that may go by the name Q9 E-Tron that’s due in 2025. The new A6 E-Tron which will be sold alongside the gas-powered A6 was previewed in April with a thinly veiled concept.

There will likely also be an A4 E-Tron as part of the next-generation A4 family, though Audi is yet to confirm plans for one.

To ensure adequate charging infrastructure, Audi is working with other companies to promote the expansion of renewable energy sources and public charging stations. Audi is also testing the waters with its own line of premium charging stations that can be booked in advance.

Continue Reading

Autos

Modern electric Bus starts testing

Published

on

2024 Volkswagen ID Buzz production model test mule spy shots - Photo credit: S. Baldauf/SB-Medien

Volkswagen’s electric successor to the iconic Microbus based on 2017’s ID Buzz concept vehicle has finally been spotted testing, albeit at a very early stage of the development.

Our spy shots show a test mule, where the new mechanical package is hidden beneath a makeshift body, in this case the modified body a T6-generation VW Transporter/Multivan.

It’s hard to spot exterior differences but it looks like the ID Buzz test mule’s wheelbase is slightly shorter than the wheelbase of the standard Transporter. Two wheelbase lengths are planned for the production model, with the United States expected to receive the longer version as standard. A shot of the interior reveals dash controls borrowed from existing VW ID models like the ID.4 compact crossover sold here and ID.3 compact hatch sold overseas.

2024 Volkswagen ID Buzz production model test mule spy shots – Photo credit: S. Baldauf/SB-Medien

The final design is likely to be tweaked significantly from what you see here and may have already been previewed in a teaser sketch of a self-driving ID Buzz (shown below) that’s slated to enter a commercial taxi service in 2025. The service will be run by VW Group’s Moia mobility division using a self-driving system developed by Argo AI, which VW Group is a major shareholder of.

The ID Buzz, which will likely be called something along the lines of ID.7 or ID.8 in production guise, is due to start sales in Europe in 2022. Unfortunately it won’t reach the United States until 2023, meaning it will likely arrive as a 2024 model. That’s a year later than originally promised.

VW has been hinting at a modern Bus for years. In fact, the automaker rolled out the first concept for one as far back as 2001. Now production is finally happening. The production will be handled at a Volkswagen Group plant in Hanover, Germany, which is being upgraded to handle electric vehicles. The plant is where VW currently builds its T-series van, the true successor to the Microbus.

Volkswagen ID.Buzz AD self-driving car prototype

Volkswagen ID.Buzz AD self-driving car prototype

The T-series earlier in June spawned the new T7 generation in passenger-oriented Multivan guise. The T7 van, which is based on VW Group’s MQB platform, will be sold alongside the ID Buzz. The ID Buzz will ride on VW Group’s MEB battery-electric platform.

Look for a base model with around 201 hp and rear-wheel drive. Above this should sit a 302-hp model with a dual-motor all-wheel-drive system. The biggest battery option should offer close to 300 miles of range.

Like the ID Buzz concept, the production version will have its batteries in the floor, allowing short overhangs front and rear, and a compact van footprint. Both passenger and commercial versions are planned, the latter previewed by 2018’s ID Buzz Cargo concept. The U.S. is only expected to receive the passenger version.

Continue Reading

Autos

Aston Martin A3 Vantage Roadster honors oldest Aston in existence

Published

on

Aston Martin A3 Vantage Roadster

It’s been 100 years since chassis number 3, now known as A3, rolled out of Aston Martin’s first facility at Abingdon Road in Kensington, London. It was the third car ever produced by Aston Martin.

To celebrate the centenary of A3, the HWM Aston Martin dealership in Walton on Thames, Surrey, collaborated with the Aston Martin Heritage Trust & Museum (AMHT) to commission three modern cars dubbed A3 Vantage Roadsters, which are now for sale.

The cost of each of these limited-edition roadsters wasn’t released, and they will all likely be sold in England.

Aston Martin A3 Vantage Roadster

Aston Martin A3 Vantage Roadster

Aston Martin A3 Vantage Roadster

Aston Martin A3 Vantage Roadster

Aston Martin A3 Vantage Roadster

Aston Martin A3 Vantage Roadster

Aston Martin A3 Vantage Roadster

The original A3

The car now known as A3 was originally driven by company co-founder Lionel Martin, and it was acquired by the AMHT in 2002. It’s powered by a 1.5-liter 4-cylinder side-valve engine with 11 hp. It set several records including an 84.5 mph run in 1923 at the Brooklands Circuit. A3 recently underwent a restoration to bring it as close to original factory condition as possible by Ecurie Bertelli, a renowned pre-war Aston Martin specialist.

Aston Martin A3 Vantage Roadster

Aston Martin A3 Vantage Roadster

A3 Vantage Roadster

Each of the three new A3 Vantage Roadsters features a black square mesh grille insert and a bright aluminum surround with a heritage badge inspired by the original A3 model. Another nod to the original is the gill inserts in the front fenders. They feature exposed aluminum panels that were hand polished by Bertelli, engraved with “NO_3,” and outfitted with fixed saddle leather straps. Unique 20-inch lightweight forged aluminum wheels painted gloss black were designed for these cars, and they hide bronze brake calipers.

The interior of the A3 Vantage Roadster features perforated seats with the heritage Aston Martin script embroidered on the center console lid. The Obsidian Black interior contrasts with brass trim and Chestnut Tan accents and stitching.

Aston Martin A3 Vantage Roadster

Aston Martin A3 Vantage Roadster

Aston Martin A3 Vantage Roadster

Aston Martin A3 Vantage Roadster

Aston Martin A3 Vantage Roadster

Aston Martin A3 Vantage Roadster

A3 Vantage Roadsters will be powered by the Vantage Roadster’s standard Mercedes-AMG twin-turbo 4.0-liter V-8 with 503 hp and 505 lb-ft of torque backed by an 8-speed automatic transmission.

The A3 Vantage Roadster will be shown to the public for the first time on Saturday, June 26 at the Dallas Burston Polo Club in Southam, Warwickshire. A display of pre-war Aston Martin and Lagonda models, Feltham-era D2 cars, plus DB4, DB5, DB6, DBS models will also be on hand, as will V-8-powered cars from 1969-2000, the DB7, the V12 Vanquish, the One-77, and the Vulcan.

Continue Reading

Trending