Connect with us

Autos

1,341-hp electric M2 reportedly in the works

Published

on

2023 BMW M2 spy shots - Photo credit: S. Baldauf/SB-Medien

BMW has been testing high-performance electric powertrains for the past few years, and one of the first production applications may be a special M2 dialed up to hypercar levels of performance.

CAR reported last week that an electric version of the next-generation M2 currently out testing in gasoline form is being developed under the code name Project Katharina. The electric M2 will reportedly debut in 2022 as the iM2, and with 1,341 hp on tap, or one megawatt. Providing the power is said to be four electric motors.

Apparently the M2 was picked as the basis for the iM2 over the larger M3/M4 due to a smaller size and resulting smaller weight. Being an M car, the iM2 will have to perform at the top level in more than just straight-line acceleration, so low weight will be key.

Reported performance for the iM2 is a 0-60 mph time of less than 2.5 seconds and a Nürburgring lap time under the magic seven-minute mark.

2023 BMW M2 spy shots – Photo credit: S. Baldauf/SB-Medien

The car is reportedly being developed to showcase BMW’s talents in high-performance electric powertrain development, as well as celebration of the BMW M division’s 50th anniversary next year.

According to CAR, the iM2 hasn’t been given the production light, and there’s a good chance it never does. Rather, it’s more likely the iM2’s technology will be transferred to the first generation of electric M cars. We’ve previously heard that a next-generation M5 due around 2024 will offer an electric option with at least 1,000 hp.

The electric M5 is expected to feature a three-motor setup with a single electric motor up front and two in the rear. BMW previewed just such a setup in 2019 using a 5-Series prototype, although the prototype was said to have just 720 hp.

As for BMW’s gasoline-powered M2, the car is due in 2022 as a 2023 model and should come with a detuned version of the 3.0-liter twin-turbocharged inline-6 found in the M3/M4. Count on it having at least 420 hp.

Continue Reading
Advertisement
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Autos

GTO Engineering Squalo to have bespoke V-12 with 10,000-rpm redline

Published

on

GTO Engineering Squalo

British company GTO Engineering has released the first details on the in-house developed V-12 engine that will power its upcoming Squalo sports car.

The Squalo has been styled to resemble a classic Ferrari, specifically the 250 GTO of the 1960s, but there’s nothing classic about the hardware going into it. We’re talking about carbon-fiber body panels, modern suspension and brakes, and a bespoke V-12 that will rev all the way up to 10,000 rpm—yes, higher than a modern Ferrari V-12.

GTO Engineering Squalo

GTO Engineering Squalo

GTO Engineering Squalo

GTO Engineering Squalo

GTO Engineering Squalo

The engine is a marvel on its own. It’s still being developed so GTO Engineering is yet to lock in the final specs, but the company has said to expect an output of more than 460 hp and a weight of less than 364 pounds. The weight is crucial as GTO Engineering has a targeted dry weight for the Squalo of less than 2,200 pounds.

The V-12 features a quad-cam design and 4.0-liter displacement, and will be paired to a manual transmission. The key to the engine’s ability to rev like a motorcycle engine is the use of lightweight parts built using modern materials and modern production techniques. The latter has enabled GTO Engineering to hollow out many parts. This same lightweight ethos also extends to the starter motor, flywheel and clutch.

GTO Engineering Squalo V-12

GTO Engineering Squalo V-12

The engine’s designers also paid attention to packaging to ensure the V-12 is as tightly packed as possible. This is important for weight distribution. GTO Engineering targets a 55/45 front-to-rear weight distribution for the Squalo. The company also targets a low center of gravity and thus the engine will be mounted closer to the firewall and lower to the floor compared to early Ferraris.

Aesthetics have also played a role in the design of the V-12—just look at those trumpets. Specific measures have included remodelling of the front timing case and ancillary drives to make them sleeker, as well as avoiding off-the-shelf parts for items like the distributor caps and main bearing sump assembly in order to develop more aesthetically pleasing designs.

GTO Engineering Squalo V-12

GTO Engineering Squalo V-12

GTO Engineering is building the Squalo’s first prototype chassis, with many parts now going into the tooling phase of production. The first customer examples of the car are due to start deliveries in 2023.

Interestingly, buyers have choice when it comes to sports cars inspired by classic Ferraris. Fellow British company RML Group only on Wednesday announced its own sports car with a design inspired by the Ferrari 250 GT SWB.

Continue Reading

Autos

2021 Acura TLX Type S to make public debut as pace car

Published

on

No. 10 Wayne Taylor Racing Acura ARX-05 DPi at the 2021 24 Hours of Daytona

Acura’s redesigned 2021 TLX has been out for a while but the version performance fans are waiting for, the TLX Type S, is yet to land in showrooms.

It arrives in late May but the public will get to see the car for the first time during the Mid-Ohio round of the 2021 WeatherTech Sports Car Championship on this weekend in Lexington, Ohio. This year’s race is officially known as the Acura Sports Car Challenge Presented by the TLX Type S.

The TLX Type S will serve as the official pace car throughout the weekend, and will be decked out in the Tiger Eye Pearl gold paint finish exclusive to the performance sedan.

There will be Acuras competing on the track as well. ARX-05 prototype racers will be competing in the DPi class and NSX GT3 Evos will be in the GTD class.

No. 10 Wayne Taylor Racing Acura ARX-05 DPi at the 2021 24 Hours of Daytona

Acura has already seen a lot of success in this year’s WeatherTech Sports Car Championship season. Recall, the Wayne Taylor Racing No. 10 Konica Minolta Acura ARX-05 scored an outright win at the 24 Hours of Daytona.

And last season Acura took home the WeatherTech SportsCar Championship’s Drivers’, Manufacturers’ and Teams’ titles in both the DPi and GTD classes.

While not as fast as Acura’s race cars, the TLX Type S should still be plenty quick thanks to a 3.0-liter turbocharged V-6 coupled with sport-tuned suspension and powerful Brembo brakes. Peak output of 355 hp and 354 lb-ft of torque will ensure the car is the quickest Type S to date.

Pricing information will be announced closer to the market launch but Acura said to expect a starting figure in the low $50,000 bracket.

Continue Reading

Autos

Fisker and Foxconn to build sub-$30,000 EV in US

Published

on

Teaser sketch for Fisker electric vehicle being developed with Foxconn

Fisker in February announced it would work with Taiwanese contract manufacturer Foxconn to realize an affordable, mass-produced electric vehicle for launch in late 2023.

On Thursday, the two companies provided an update on the plans, including confirmation the vehicle, code-named Project Pear, will be built in the United States and have a price tag of less than $30,000, before incentives. A specific site for production is still under evaluation.

The vehicle’s code name is an acronym for “Personal Electric Automotive Revolution,” and Fisker is looking to build as many as 250,000 units annually for global sale, with the company planning production in other countries should demand reach those levels.

Fisker said the exterior design of the vehicle is locked in, and supply chains for vital components such as chips already addressed. The next key stage is developing a lightweight platform, code-named FP28. The FP28 will be related to the modular EV platform Foxconn unveiled in 2020.

Teaser sketch for Fisker electric vehicle being developed with Foxconn

By relying heavily on information technology, the two companies are looking to go from initial R&D to production within the space of 24 months, or about half the traditional time it takes to launch a new vehicle.

“We created our company to disrupt every convention in the auto industry,” Henrik Fisker, chairman and CEO of Fisker, said in a statement. “We will create a vehicle that crosses social borders, while offering a combination of advanced technology, desirable design, innovation and value for money, while delivering on our commitment to create the world’s most sustainable vehicles.”

Project Pear will be the second electric vehicle from Fisker. The first will be the Ocean crossover that Fisker has tapped Austrian contract manufacturer Magna Steyr to build. The Ocean is being developed on a platform supplied by Magna and will start production at Magna’s plant in Graz, Austria, in late 2022. A production-ready prototype will be shown in November at the 2021 Los Angeles Auto Show.

There could be even more Fisker vehicles arriving in quick succession. The company in January showed an image of a lifestyle pickup truck, and in the past has hinted at a coupe-like crossover, as well as a super sedan based on a 2018 concept.

Continue Reading

Trending